How To Use STRETCH

Here is a great tool that is underused and not understood by many. The STRETCH command will allow you to adjust/move objects like a window or door opening without having to do much effort on your part. The hard part is remembering that it requires a “crossing window.”

A crossing window is the green selection window that starts at the right side and finishes at the left (as seen below)

Here’s the rule to remember how this tool works. Whatever is completely within the crossing window gets moved. And whatever the crossing window is crossing gets stretched.

If you keep ortho on or are able to snap to something in the desired direction, you will find this tool to be very helpful.

Here’s How:

  • STR <enter> or STRETCH <enter> to start the STRETCH command
  • Select objects using and crossing window (default) or CP <enter> for crossing polygon.
  • You can also use C <enter> to make a crossing window in any direction as explained HERE.
  • Specify a base point anywhere along the direction in which you you plan on stretching.
  • move your cursor in the direction and either click to end or type in a distance.

The following animation shows how you can use any number of selection methods when selecting objects as I have mentioned before HERE. Notice that When prompted to “select objects” I enter C <enter> and then now matter which direction the window I make, it is always a “crossing window” (green window).

~Enjoy

About these ads

About AutoCAD Tips

I work for a large engineering firm and perform various CAD Administration duties and. I enjoy teaching/tutoring people in AutoCAD and seeing them enjoy using the program as much as I do. I hope that you find this blog a useful tool.
This entry was posted in BASICS, Modifying, TIPS. Bookmark the permalink.

20 Responses to How To Use STRETCH

  1. Just what I was looking for. Thank you so much.

  2. Kossiwa says:

    When I use it, it was just moving the objects… thanks for the crossing window!!! ;)

  3. Pingback: How To Use Stretch With an Angle | AutoCAD Tips

  4. arpit gupta says:

    thanks

  5. Abz says:

    Hi,
    Do you have tutorial videos or sites for autocad?
    Thanks.

    • AutoCAD Tips says:

      I don’t have a video series or anything like that. I try to keep the tips posted on this blog fairly short. I did create one video though found [here] that shows how to quickly copy lisp code from this blog and test it.

  6. hdsumer says:

    Awesome! Thank you!
    Being used with 3D parametric modeling software I always stumble upon this when using AutoCAD. So amazed that AutoCAD is still mainly non parametric.

  7. Herbex Gomez says:

    LONG WAS LOOKING A FOR THIS EXPLIANATION. GREETINGS FROM VENEZUELA

  8. sgonzales@akmce.com says:

    Thank you for this.

  9. sana khan says:

    guys tell us correct and exact way of using stretch command plx:)

  10. Sam says:

    Thanks a lot.
    I stumbled on this by accident. did not know the window has to be drawn right to left

    • AutoCAD Tips says:

      I’m glad that you found the tip. One thing I would like to follow up on – when you are prompted to make a crossing window, it doesn’t have to be from left to right. It just has to be the green type of “crossing window”. This can be achieved in any direction by typing in WC in the command line when asked to make the selection.
      ~Greg

  11. noyal says:

    nice i don’t know about this command this is very efficient and time reducing

  12. ALVIN.S says:

    nice : THANK YOU

  13. Really useful tip about a command which is so useful but not easy to grasp at first.

  14. lbingle says:

    Thanks for the tip on using stretch. I am study up for the AutoCAD exam and the course book does a poor job of explaining how to use stretch. This was much more useful.

  15. naresh says:

    hi … its too cool…can you please explain me ..for the above example in between two line itfhere is a hatch how can we streatch hatch tooo..

    • AutoCAD Tips says:

      As long as the hatch(es) are “Associative” which means that they will adjust to a boundary if the boundary is moved, the hatch should follow accordingly. It is difficult to re-associate hatches in some instances so it might be easier to erase the hatch and place a new instance of the hatch and make sure that “Associative” is turned on.
      ~Greg

  16. Adams says:

    how do I expand a full drawing?

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s