Express Tool: Replace Block

Have you ever needed to replace a block throughout your drawing?

Here is an Express Tool that will make your life a lot easier:
(WARNING: this globally replaces the block that you select and you may lose the block if chosen to do so)

  • BLOCKREPLACE <enter> OR
  • From the Express Tools ribbon > Blocks panel select the “Replace Block” button

 

 

  • From the “BLOCKREPLACE” dialog box, either select the block name from the list or click the “Pick<” button (as seen below). This will allow you to go into your drawing and select an instance of the block that you would like to replace.

 

 

 

  • After selecting the block that is to be replaced, Now the dialog box is asking you what block you would like to replace it with. Again, you can either choose the name of the block from the list or click the “Pick<” button to go into your drawing and select a block.

 

 

  • After you select the block that is to replace the other block(s), click OK.
  • You are then asked (in the command line) whether you would like to purge from the drawing, the block that is being replaced. If you plan on using this block in the drawing, don’t purge it.

The blocks have now been replaced throughout the drawing at their insertion points.

About these ads

About AutoCAD Tips

I work for a large engineering firm and perform various CAD Administration duties and. I enjoy teaching/tutoring people in AutoCAD and seeing them enjoy using the program as much as I do. I hope that you find this blog a useful tool.
This entry was posted in BASICS, Blocks, Express Tools, Modifying, TIPS. Bookmark the permalink.

2 Responses to Express Tool: Replace Block

  1. Pingback: Replace Selected Blocks | AutoCAD Tips

  2. Dave says:

    But it doesn’t always seem to work. If you have a simple block going in and another one coming out there doesn’t seem to be a problem. But if your block is dynamic or even “worse” contains attributes, no dice. You might get one replaced or none. Tested on multiple machines using AutoCAD 2012… same result. This would be a *very* handy tool within AutoCAD if it worked in all cases.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s